Embedded Systems
Electronics and firmware you can build a product on.
From schematic to shipping firmware, we design custom electronics that are reliable, power-efficient and connected — and make sure they can be manufactured, tested and updated in the field.
Capabilities
What we build in embedded systems.
Senior engineers across mechanics, electronics, firmware and software — so each capability connects cleanly to the rest of the system.
Schematic & PCB design
Multilayer, mixed-signal and power boards with DFM, test points and assembly planned from day one.
Firmware development
Bare-metal and RTOS firmware in C, C++ and Rust — drivers, state machines, bootloaders and tests.
Sensors & actuators
IMUs, gas, environmental and industrial sensors; motor drivers, power stages and signal conditioning.
Connectivity & IoT
BLE, Wi-Fi, LoRaWAN, cellular and field buses — with secure provisioning and cloud integration.
Low-power design
Power budgets, sleep strategies and battery management for devices that last months, not days.
OTA updates & edge AI
Fail-safe over-the-air updates and on-device ML inference on microcontrollers and edge SoCs.
Typical projects
Where teams usually start with us.
Representative engagements. Timelines are typical ranges — we confirm scope, milestones and cost with you before any work begins.
- P-01POC 3–5 weeks
Connected sensor node
A battery-powered device that measures, logs and reports over BLE or LoRaWAN, with remote configuration and OTA updates.
- P-02Prototype 6–10 weeks
Motor controller board
BLDC or stepper control with FOC, current sensing, protections and a CAN or RS-485 interface.
- P-03Prototype 5–8 weeks
Dev-board to custom PCB
Turn a working Arduino, ESP32 or Raspberry Pi prototype into a compact, robust, manufacturable board.
- P-04POC 4–6 weeks
Edge gateway
A Linux-based gateway that bridges field buses to the cloud, with local processing and remote management.
Tools & platforms
Proven tools, chosen for your constraints.
- MCUs & SoCs
- STM32
- ESP32
- Nordic nRF52/53
- RP2040
- NXP i.MX
- RTOS & frameworks
- Zephyr
- FreeRTOS
- ESP-IDF
- Embedded Linux / Yocto
- MicroPython
- Design & test
- KiCad
- Altium Designer
- LTspice
- Logic analysers
- Oscilloscopes
- Protocols
- I²C / SPI / UART
- CAN
- Modbus
- BLE
- MQTT
- LoRaWAN
FAQ
Embedded Systems, answered.
Can you take our dev-board prototype to a custom PCB?
Yes — it is one of the most common starting points. We re-architect for cost, size, reliability and manufacturability while keeping what already works.
Do you help with certification?
We design with EMC and safety requirements in mind from the first schematic, and can prepare your design and documentation for pre-compliance and certification testing with accredited labs.
Who maintains the firmware after handover?
Your choice. We can stay on to maintain and extend it, or hand over a clean, documented and tested codebase to your team.
Start a project
Let’s scope your project.
From a dev-board prototype to production-ready electronics — tell us what your device needs to do and we’ll show you how to get there.