Accepting new projects

From idea to working machine.

Deccan Robotics is an engineering studio for robotics, embedded systems and industrial automation. We consult, prove out concepts and build working prototypes — so you can de-risk early, demo sooner and scale with confidence.

How we engage
  1. 01Consult
  2. 02Prove
  3. 03Prototype
SIM-01 · 3-axis palletiser Auto
Interactive robot arm simulationA robotic arm picks boxes from a conveyor and stacks them on a pallet, solving inverse kinematics in real time. Move your pointer over the cell, or tap it, to set a target.ZXWORLD0.581 mPALLET-01CONV-Aθ1DR·01
J1
+070.3°
J2
−125.6°
J3
−034.7°
TCP X
0.338 m
TCP Z
0.346 m
Grip
Closed
Picks
002

Platforms & tools we build with

  • ROS 2
  • micro-ROS
  • Gazebo
  • NVIDIA Jetson
  • Raspberry Pi
  • STM32
  • ESP32
  • Nordic nRF
  • Zephyr RTOS
  • FreeRTOS
  • KiCad
  • Altium
  • Fusion 360
  • SolidWorks
  • Siemens TIA Portal
  • CODESYS
  • OpenCV
  • PyTorch
  • MATLAB / Simulink
  • Modbus
  • CAN bus
  • EtherCAT
  • OPC UA
  • MQTT
  • LoRaWAN

01What we do

Three disciplines. One integrated team.

Hard problems live where mechanics, electronics and software meet. We cover the whole stack, so nothing falls through the gaps between vendors.

ABCSTARTGOALA* · 33.6 m · 150 nodes
01 / 03

Robotics

Mobile robots, manipulators and the autonomy that drives them.

  • Robot design & system integration
  • ROS 2 software & simulation
  • Motion control & kinematics
  • Perception, SLAM & navigation
MCUCORTEX-MIMUU2BLE·WiFiU3Y1J13V3PWRDRVU4 · M1D1DR-EMB-01 · REV A
02 / 03

Embedded Systems

Custom electronics and firmware that are reliable, efficient and connected.

  • Schematic & PCB design
  • Bare-metal & RTOS firmware
  • Sensors, motors & power
  • BLE, Wi-Fi, LoRa & cellular IoT
RUNPLC-01OK1,284NG3CAM-01
03 / 03

Industrial Automation

Smarter lines, safer machines and data you can act on.

  • PLC, HMI & SCADA
  • Machine retrofits & special-purpose machines
  • Machine vision inspection
  • IIoT monitoring & dashboards

02Ways to work together

Start small. Prove it.
Then build it.

Every engagement is scoped around a clear question — and ends with something you can hold, test or decide on.

  1. 01

    Consulting

    Expert eyes on your idea, design or problem.

    Typical duration
    1–3 weeks
    Best for
    Early ideas, stalled projects and technical due diligence.

    You get

    • Feasibility & risk assessment
    • System architecture & component selection
    • BOM and cost estimates
    • A written, costed roadmap
  2. 02

    Proof of Concept

    Answer the riskiest question with working hardware.

    Typical duration
    3–6 weeks
    Best for
    Validating a core technology before you commit serious budget.

    You get

    • A focused bench or field demonstrator
    • Test data against agreed success criteria
    • Go / no-go recommendation
    • Plan and estimate for the prototype
  3. 03

    Prototyping

    A functional prototype you can demo, test and pitch.

    Typical duration
    6–16 weeks
    Best for
    Investor demos, pilot customers and user trials.

    You get

    • Integrated mechanics, electronics & firmware
    • Demo-ready units
    • Test reports and known-issues log
    • Full design files & documentation

Need ongoing engineering capacity? We also work on retainers — embedded with your team or owning a subsystem end to end.

How we work

03Process

A process built around decision gates.

Hardware gets expensive when surprises arrive late. We front-load risk, show progress every week and give you a clean decision point at the end of every phase.

  1. Discover

    1–2 weeks

    Workshops, requirements and constraints. We map the technical risks and agree what success looks like.

    OutputTechnical brief, risk map & plan

    Decision gate after phase 1: Feasible?

  2. Prove

    3–6 weeks

    Targeted experiments on the riskiest assumptions — on the bench or in the field — before anything gets expensive.

    OutputWorking proof of concept + test data

    Decision gate after phase 2: Does it work?

  3. Prototype

    6–16 weeks

    Integrated design across mechanics, electronics, firmware and software, built and iterated in short cycles.

    OutputFunctional, demo-ready prototype

    Decision gate after phase 3: Is it right?

  4. Validate

    2–6 weeks

    Testing, refinement and design-for-manufacture review, then a clean handover to your team or manufacturer.

    OutputValidated design & handover pack

Every gate is a clean exit. You keep the code, schematics, CAD and documentation produced so far — no lock-in, no surprises.

04Capabilities

Silicon to cloud, layer by layer.

The Deccan plateau was built from layer upon layer of basalt. Great machines are built the same way — and the hardest bugs live between the layers. We engineer every one of them, and the interfaces in between.

Telemetry pipelines, dashboards, OTA update infrastructure, fleet management and remote diagnostics.

  • MQTT
  • AWS IoT
  • InfluxDB
  • Grafana
  • Docker

SLAM, localisation, path planning, computer vision and machine-learning inference at the edge.

  • ROS 2 Nav2
  • OpenCV
  • PyTorch
  • TensorRT
  • PCL

Kinematics, trajectory planning, PID and model-predictive control, motor control and sensor fusion.

  • MATLAB / Simulink
  • C++
  • Python
  • EtherCAT
  • CANopen

Bare-metal and RTOS firmware, drivers, bootloaders, communication stacks and power management.

  • C / C++
  • Rust
  • Zephyr
  • FreeRTOS
  • ESP-IDF

Schematics, multilayer PCB layout, power electronics, sensor front-ends and EMC-aware design.

  • KiCad
  • Altium
  • LTspice
  • Bench test & debug

Mechanisms, enclosures, design for manufacture and assembly, 3D printing and CNC prototyping.

  • Fusion 360
  • SolidWorks
  • FDM / SLA
  • CNC

05Why Deccan Robotics

Engineering partners, not a black box.

We work the way we would want an engineering partner to work with us: openly, in small verifiable steps, with nothing hidden in the handover.

  • Prototype early

    Real hardware on the bench beats months of slides. We build to learn, then build to last.

  • One team, full stack

    Mechanical, electronics, firmware and software engineers working from one plan — no hand-offs between vendors.

  • Decision gates, no lock-in

    Clear milestones and clean exits. You decide when to proceed, pivot or stop.

  • Documentation is a deliverable

    Source, schematics, CAD, BOMs and test reports — everything needed to carry the work forward.

  • Built for the field

    Heat, dust, vibration and patchy power are design inputs, not surprises.

  • Progress you can see

    Weekly demos and written updates, so you always know where the project stands.

06Industries

For the people who make, move and grow things.

Our work travels well between sectors — the physics of motors, sensors and control loops don’t change. Here’s where we see the biggest opportunities.

  • Manufacturing

    Line automation, special-purpose machines, vision QC and robot cells.

  • Warehousing & logistics

    AMRs, conveyor and sortation control, inventory sensing.

  • Agriculture

    Field robots, precision irrigation, crop and soil sensing.

  • Healthcare & life sciences

    Lab automation, assistive devices and connected monitoring hardware.

  • Energy & utilities

    Solar-plant robotics, smart metering and remote asset monitoring.

  • Consumer electronics

    Connected products, wearables and smart-home devices.

  • Education & research

    Research robots, lab rigs and custom instrumentation.

  • Hardware startups

    From napkin sketch to investor-ready prototype.

07FAQ

Questions, answered.

Didn’t find what you were looking for?

Ask us directly
What does a typical first engagement look like?

Usually a short discovery or consulting phase of one to two weeks. We clarify requirements, map the technical risks and give you a costed plan for a proof of concept or prototype. You can stop there with a useful document in hand — or move straight ahead.

Do you sign NDAs?

Yes. We are happy to sign a mutual NDA before you share anything sensitive — just mention it when you get in touch.

Who owns the intellectual property?

Under our standard terms, the project deliverables we create for you — designs, source code, schematics and CAD — are yours. Any pre-existing tools or libraries we bring are declared upfront.

Can you work alongside our in-house team?

Absolutely. We can own a complete subsystem, add engineering capacity on a retainer, or review and de-risk designs your team has already built.

Do you handle manufacturing?

We design for manufacture from the start, prepare production files and documentation, and support pilot builds with fabrication and assembly partners. We are not a contract manufacturer — but we will get you to one, ready.

How do you price projects?

Discovery and consulting are usually time-based. Proofs of concept and prototypes are scoped as fixed-price milestones wherever the requirements allow, so you know the cost of each phase before it starts.

Do you work with clients outside India?

Yes. We work remotely with weekly demos, shared repositories and video walkthroughs, and ship hardware wherever it needs to go.

Start a project

Have a machine in mind?

Tell us what you’re building. We’ll come back with questions, a first view on feasibility and the fastest path to a working prototype.